Skip to content

How to track cones and lashing in the 2D Bay View

Use this guide to see which containers need cones (twistlocks) in the 2D Bay View. You set the rules, the application marks the containers, and you can print a report. This page is also the overview of the two tracking modes Cones Usage and Lashing Usage.

The result is an estimate from your own parameters. The application does not check weights or stress. Use it as a manual tracking tool for reporting only. It does not replace the lashing plan of the ship.

Mode What it estimates Guide
Cones Usage Which containers need cones (twistlocks) between them. This page.
Lashing Usage How many lashing rods each container above deck needs. How to track lashing usage in the 2D Bay View

Before you start: open your file in the 2D Bay View. See How to navigate the 2D Bay View. You need a membership that includes this feature, and Admin or Edit permission for the facility. Guest users and accounts that have expired cannot use it. The modes Cones Usage and Lashing Usage are in the Mode list only for accounts that can use them. If you do not see the modes, ask your Facility Administrator or contact Support.

  1. In the Mode list at the top, choose Cones Usage. If the application has no parameters for this file yet, the window with the cone parameters opens by itself. If it has them, click Change Calculation Parameters in the Cones Usage bar to open the window.
  2. Set the parameters (2 in the picture). Use the Example Bay: list on the right to see the effect in a small picture. The table below explains each parameter.
Parameter Choices At first What it does
Port of Load - ALL - or one port from the file - ALL - The calculation uses only the containers with this port of load. The other containers stay N/A.
Port of Discharge - ALL - or one port from the file - ALL - The calculation uses only the containers with this port of discharge. With both ports chosen, a container must match both.
Include base tier (Above) YES or NO YES Above deck: do the containers on the lowest used tier of the bay get cones?
Include 40’+ containers (Below) YES or NO NO Below deck: do containers of 40 feet or more get cones?
Include bottom container in stack (Below) YES or NO NO Below deck: does the container at the bottom of a stack get cones?

The Cones Usage mode with the window for the cone parameters and the CHANGE and CANCEL buttons

  1. Click CHANGE (3 in the picture above). To close the window without a calculation, click CANCEL. The Colour by list in the Color & Filter panel shows Cone usage. The containers that need cones are green. The containers with no cones are grey. The containers that the calculation left out are light grey and show N/A. The list under Colour by shows the number of containers for each.

Bay 001 coloured by cone usage, with the On Click choices and the containers that need cones in green

  1. To change containers by hand, choose No cones or Cones in On Click (the radio buttons in the Cones Usage bar). Then do one of these:

    1. Click one container.
    2. Press the mouse button and drag a rectangle over several containers. Every container inside the rectangle gets the On Click value.

    The status bar at the bottom says Please select containers to add or remove twistlocks/cones.

  2. To change the parameters again, click Change Calculation Parameters. If you set containers by hand, the window also has the button DELETE custom Twistlocks with the number of these containers, for example DELETE custom Twistlocks (1) and CHANGE (the orange frame in the picture).

    • CHANGE uses the new parameters and keeps the values that you set by hand.
    • DELETE custom Twistlocks (1) and CHANGE deletes your own values first. Then it uses the new parameters for all containers.

The cone parameters window with the buttons CHANGE, DELETE custom Twistlocks (1) and CHANGE, and CANCEL

  1. To print the result, click Cones Usage Report in the Cones Usage bar. The Cones Usage Report window opens. Choose the options (see the table below) and click GENERATE PDF (1 in the picture). When the PDF is ready, click Download PDF.

The Cones Usage Report window with the report options and the GENERATE PDF button

Option Choices At first
Summary and color by A value of your choice, for example Line Operator Line Operator
Line operators All Line Operators, or only one line operator All Line Operators
Orientation Landscape or Portrait Landscape
Paper size Letter, Legal, A4 or A3 Letter
Logo Add Logo or Don’t add Logo. Only if your facility has a logo. Add Logo
Bay diagrams Don’t print bay diagrams, or the number of bays in each row (Bays per row, 1 to 8) Don’t print bay diagrams
Group bays Don’t Group Bays Vertically or Group Bays Vertically Don’t Group Bays Vertically
Legend Add Legend or Don’t Add Legend Add Legend

The lists for grouping bays and for the legend are grey until you choose a number of bays in each row.

The first page of the PDF has the vessel name, Cones Usage Report and a table. The table has one row for each value of Summary and color by and a Total column. The total is the number of containers that need cones. It is not the number of cones. If you chose bays in each row, the next pages show the bay diagrams.

The first page of the Cones Usage Report PDF with a table of the total for each line operator

How the application finds the containers that need cones

Section titled “How the application finds the containers that need cones”

The application checks the containers bay by bay. A 40-foot container belongs to the odd bay in front of its even bay. Above deck means the tiers 68 and higher. For each container it follows these rules in this order:

  1. Ports. If you chose a port of load or a port of discharge and the container does not match, the container is left out and shows N/A.
  2. Your own value. If you set the container by hand, your value is used.
  3. Vessel definition (OVD). If the vessel has an OVD file that marks which slots need cones, the application uses it. A container gets cones when its slot is marked for its length. In this case the window shows only the two port lists, and the three YES / NO parameters are not used.
  4. Above deck. Every container gets cones. The one exception is the base tier when Include base tier is NO. The base tier is the lowest tier above deck that has a container in this bay. It can be different in each bay.
  5. Below deck. A container of 40 feet or more gets no cones when Include 40’+ containers is NO. For the other containers:
    • If Include bottom container in stack is YES, the container gets cones.
    • If it is NO, the container gets cones only when there is a container directly below it, in this bay or in the next even bay. A container at the bottom of a stack gets no cones.
  • The numbers come from the parameters you set. They are not a stress calculation.
  • The application saves your parameters and your own values for this file. They are not written into the BAPLIE file.
  • The panel Color & Filter shows a line under the list with the ports that the calculation uses: Port of Load and Port of Discharge. - ALL - means no port was chosen.
  • Nothing is calculated until you click CHANGE. If you click CANCEL in the first window, the containers show N/A. Click Change Calculation Parameters, then CHANGE.
  • When you set a container by hand, nothing happens, and no message shows, if the container is below deck and is 40 feet or more, or if its port of load or port of discharge does not match the ports in the parameters.
  • If you change Voyage to Outbound, the application swaps the ports. The old port of discharge becomes the port of load, and the port of discharge becomes - ALL -. If you change back, the application swaps them back. The two voyages keep separate results.
  • You can select containers in the Single Bay and Mini Bays views. In the Side and Deck views you cannot select containers. A message tells you to switch to Single Bay or Mini Bays.
  • The mode Cones Usage pauses the automatic refresh of the page.